目前位置 : now_page 首頁homepage >  增壓系列 Boost series > 增壓系列-氣體增壓泵浦 High Pressure Gas Booster > 氣體增壓泵浦之特性及應用 High Pressure Gas Booster Feature & Application   回上一頁 back
   

這是空氣壓縮機提供高壓力的另一貢獻。DETER的高壓氣體增壓泵浦,堅固耐用,不需電力,也不需連結機械驅動,它是用同一氣源加以放大增壓,而且可以安裝在任何位置(處所)。
在循環軸中較小的一端裝上一個永久性的氣壓彈簧,這樣可以確保高低壓尚未達到平衡前能夠繼續不斷的動作(加壓)。
在活塞間的兩個不同面積比統稱為面積比。這個面積比值是附在所有型式規格的-而由驅動氣源的壓力及面積比,即可推定高壓氣體增壓泵浦的出口壓力最大值。
唯有DETER能不使用油劑潤滑的密封技術而可以使產生高壓的區段,順暢地作動。
An dedicated alternative to High Pressure Compressor, DETER High pressure Gas Boosters are compact , require no electrical or mechanical drives connections, are powered by the same air that they amplify, and can be mounted in any position.
The small end of the cycling spool uses a permanent air spring, This unbalanced cycling spool ensures that the air amplifier cycles on demand.
The ratio of the areas between the Connected pistons is called the Area Ratio and is the dash number used in all model codes. This ratio and the pressure of the air drive source determine the maximum outlet pressure of the Gas Booster.
Unique DETER seal technology enables the drive section of its pressure generating products to operate uikthout air Line Lubrication.

Key Features 關鍵性特點

●Infinitely Variable outlet pressure and flow capability.
出口壓力及流量可以無限大
●No heat, flame, or spark risk
沒有熱、火焰或火花的危險
●No air line Lubrication reguired eliminating oily exhaust.
管路無需潤滑油,所以排氣不會有油污
●Long seal life and easily maintained
氣密性佳壽命長,且很容易維護
●Wide range of models,controls and options.
有寬廣的樣式,控制方法及規格
●Wide standard product range, complete custom-made system.
標準樣式多,且有完整的訂製系統

General Description一般說明

氣體增壓泵浦是一種打氣筒,它是利用被壓縮的空氣來驅動在尚未達到平衡時的供給壓進行循環性的打氣,以提高輸出側的氣體壓力。
高壓力的產生是使用不同的活塞面積組裝而成。利用低壓力使大面積的活塞再去推小面積的活塞而產生高壓力。循環的作動是靠(經由)兩個氣閥的訊號,一個是交替訊號閥,另一個是大面積活塞循環驅動。
An High pressure Gas Booster is an air pump that is driven by part of the incoming compressed air supply enabling it to cycle and pump the unbalance of the supply to a higher output pressure.
Pressure is generated by use of the differential area pistonassembly. Low air pressure applied to a large area cretes high pressure air on the small area. Cycling is achieved through the use of two pilot valves that alternately pilot vale, and the larger area end of the cycling spool.